S-B18-2(M) Automatic Strip Feeder is to link with press for end stamping or can body drawing. Strip piled pallet is to be sent into lower roller table. Rollers on the table ,driven by a motor, turn and carry the pallet forward. Forks lift strip stack up and gradually lift up. Three suction pads suck strip up one by one and send it out. When strips are not enough, four small stoppers extrude out to temporarily support remnant strips. At the same time, forks immediately lower down to lift second stack up to replenish strips so as to feed strips continuously into press. With simple design and multiple safety devices, easy for maintenance and can size changeover.

coming soon
coming soon
products/Food-Canning-Machinery/Automatic-seamer/S-B18-2/S-B18-2.gif
proimages/products/Can-making-machine/Automatic-sheet-strip-feeder/S-B18-2/S-B18-2_1.jpgproimages/products/Can-making-machine/Automatic-sheet-strip-feeder/S-B18-2/S-B18-2_2.jpgproimages/products/Can-making-machine/Automatic-sheet-strip-feeder/S-B18-2/S-B18-2_3.jpgproimages/products/Can-making-machine/Automatic-sheet-strip-feeder/S-B18-2/S-B18-2_4.jpgproimages/products/Can-making-machine/Automatic-sheet-strip-feeder/S-B18-2/S-B18-2_5.jpgproimages/products/Can-making-machine/Automatic-sheet-strip-feeder/S-B18-2/S-B18-2_6.jpg

Specifications

Machine TypeS-B18-2S-B18-2MS-B18-2L
Connecting Width M/C Type S-B18GL S-B18 / S-B9B S-B18GLL
Strip Length 760 - 1065mm 760 - 1040mm 760 - 1065mm
Strip Width 115 - 300mm 230 - 400mm
Capacity Per Min. 40 SPM 40 - 25 SPM
Horse Power Required 1HP x 1 , 1/2HP x 3
Compressor Air Required 3 BAR x 20L/min.
Floor Space Overall Height 2850 x 1870 x
1700 mm
2850 x 1780 x
1700 mm
3170 x 1890 x
1980 mm
Net Weight (approx.) 1600 kgs 1700 kgs 1800 kgs

Features

  1. Strips can be feeded with 180 turnover.
  2. With vacuum to pickup strips suitable for steel and aluminum plate.
  3. Completely synchronized with Press feeding.
  4. Multi-safety design for machine and personnel safety.
  5. Easy for can size changeover and adjust.
  6. Save operating labor to reduce cost.
  7. Can be connected with press model S-B9B,S-B18,S-B18G(5) or S-B18GL, S-B18GLL to save labor cost.
  8. A special design robot strip feeding cart is available on request for one S-B37SA and two or three S-B18-2(M) operation.

Layout Dimension

proimages/products/Can-making-machine/Automatic-sheet-strip-feeder/S-B18-2/S-B18-2-layout.jpg
TEL : +886-4-26238181 mail : contact@shinican.com.tw
I agree