S-A17A Automatic Irregular End Lining and Drying Machine is designed for non-round end. Curled end is separated by a pair of separating knives on the end magazine; then, end is smoothly fed forward via two end pushing bars. End is lifted up by a lower chuck to open two sets of mechanical lining guns to evenly spray compound along the end fringe. Guns turn along end fringe according to a cam contour. Lined ends are pushed into oven by end feeding bars and guided up by two transfer screws inside the drying oven. Dried ends are ejected by a magnetic belt on the oven top. Heating air is created and recycled through two sets of electric heater and blower. Simple structure and multiple safety devices, easy for operation and maintenance.

coming soon


Machine TypeS-A17A
Range of Can Dia. 70L x 58W mm - 206L x 142W mm
Capacity Per Min. Up to 60 Ends
Horse Power Required and HeaterMain Motor 1HP x 1
End Discharge Motor 1/8HP x 2
Blower 1/2HP x 1
Heater 15KW
Compressed Air Required 2kg/cm2 x 10L/Min.
Floor Space Overall Height 2570 x 1000 x 3270 mm
Net Weight 1300 kgs


  1. Witch 2 sets mechanicalc lining gun for end compound lining. easy volumn adjusting.
  2. Drying Oven is vertical design, hence save space.
  3. Safety devices provided to ensure M/C running safely.
  4. Auto temperature controller enable to adjust the best curing temperature.
  5. Easy adjustment and quick for can size change over.
  6. Equipped with two mechanical lining guns.
  7. Drying oven equipped with electric (resistance) heating system.
  8. Ends are lifted by two screw posts inside drying oven and carry out by a magnet conveyor on the top.
  9. Recommended for Water base compound.

Layout Dimension

TEL : +886-4-26238181 mail : contact@shinican.com.tw
I agree