S-B53 Automatic Inside Spray Machine is built for three piece tin can production. One side sealed can bodies are fed into from two top can chutes, carried into two spraying stations by two timing screw and turrets. Two sets of NORDSON spraying guns undertake spraying job on each station; first gun for can wall spraying while second gun for can bottom. Spraying angle can be adjusted easily. While being sprayed, can is supported by an index turret and turned by tangent friction force form two belts. Sprayed cans eject from bottom exit naturally. Equipped with one spraying stations. With NORDSON spraying system and anti-explosion motor, steady and safe. Multiple safety devices are equipped for easy maintenance and safe operation.
Range of Can Dia.
202 - 401D
Range of Can Height
40 - 200mm
Capacity Per Min.
Up to 300 Cpm
Horse Power Required
2HP x 1 , 1/12HP x 1
Compressed Air Required
4kgs x 20L/min
Floor Space Overall Height
2000 x 1500 x 2150 mm
Equipped with NORDSON airless spray system.
With explosion proof motors.
Can guide and turret with hard chromium plating.
No Can No Spray and jam stop control.
Use INVERTER for variable speed control.
Double-set spray guns on each spraying station, three guns system is also available.
Easy adjustment and high quality is suitable for mass production line.
Equipped with single spraying station for middle production rate.
Smoke discharge system to outdoor is to be built by buyer.